Anmol Chemicals is the pioneer manufacturers of Monoammonium Phosphate & Diammonium Phosphate, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Monoammonium Phosphate & Diammonium Phosphate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Monoammonium Phosphate & Diammonium Phosphate is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ------------ Contact

Mono Monoammonium Monobasic Ammonium Phosphate Monobasic Manufacturers Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Jumbo Packing Di Diammonium Dibasic Ammonium Phosphate Dibasic Manufacturers

Ammonium Phosphate Monobasic or Monoammonium Phosphate SDS GHS, MSDS Sheet

Specifications of Monoammonium Phosphate & Diammonium Phosphate

Diammonium  Phosphate or Ammonium Phosphate Dibasic SDS GHS, MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: Phosphoric acid di ammonium salt; di ammonium phosphate; DAP; di ammonium phosphate, diammonium phosphate.
CAS No.: 7783-28-0
EINECS EC Number: 231-987-8
Molecular Weight: 132.06
Chemical Formula: (NH4)2HPO4
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead above.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

3. Composition/Information on Ingredients

Ingredient: Diammonium  Phosphate or Ammonium Phosphate Dibasic
CAS No.: 7783-28-0
EINECS EC Number: 231-987-8

4. First Aid Measures

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.

5. Fire Fighting Measures

Fire: Di Ammonium Phosphate is not considered to be a fire hazard. Fire may produce toxic fumes.
Explosion: Diammonium  Phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: nitrogen oxides (NOx), Oxides of phosphorus
Special Information: In the event of a fire over Diammonium  Phosphate, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Ventilate area of leak or spill. Avoid dust formation. Avoid breathing vapors, mist or gas. Do not let product enter drains. Wear appropriate personal protective equipment. Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust.

7. Handling and Storage

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect Di Ammonium Phosphate against physical damage. Isolate from incompatible substances. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for Diammonium  Phosphate. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: White crystals or granules.
Odor: Odorless.
Solubility: 1g/1.7ml water.
Specific Gravity: 1.62
pH: 8.0
% Volatile by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: Di Ammonium Phosphate at 155C (311F) Decomposes.
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.

10. Stability and Reactivity

Stability: Di Ammonium Phosphate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Burning may produce ammonia and oxides of phosphorus.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Strong acids, Sodium hypochlorite.
Conditions to Avoid: Incompatibles.

11. Toxicological Information

Acute toxicity
LD50 Oral - Rat - 6.500 mg/kg
LD50 Dermal - Rat - male and female - > 5.000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.

12. Ecological Information

Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 155 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia (water flea) - 140 mg/l
Environmental Fate: No information found
Environmental Toxicity: No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of Di Ammonium Phosphate may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose container and unused contents in accordance with federal, state and local requirements.

14. Transport Information

DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
ADR/RID: Not regulated

15. Regulatory Information

USA:
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).

Canada WHMIS: Not controlled under WHMIS (Canada).

EINECS EC Number: 231-987-8
DSCL (EEC): R38- Irritating to skin. R41- Risk of serious damage to eyes.

HMIS (Perceived): Health Hazard: 2, Fire Hazard: 0, Reactivity: 0, Personal Protection: E
NFPA (Perceived): Health: 2, Flammability: 0, Reactivity: 0, Specific hazard:

16. Other Information

Disclaimer:
********************************
Our company provides this Diammonium  Phosphate or Ammonium Phosphate Dibasic SDS Sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
********************************

Monoammonium Phosphate Diammonium Phosphate Manufacturers
Ammonium Phosphate Monobasic & Dibasic manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Anmol Chemicals India

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 25 January, 2022